|
|
|
Chongqing Qiao Chang Import and Export Trade Co., Ltd.
|
|
| |
|
|
|
|
|
|
|
Civil application of Aluminium Sheet/Plate/Coil
1) Heat treatment non-reinforced plate & sheet:
Alloy: 1xxx, 3xxx, 8xxx series; Temper: O, F, H111, H112, H12, H14, H16, H18, H19, H22, H24, H26
Thickness(mm): 0.2-150; Width(mm): 500-2400; Length(mm): 500-10000
Adopt standard: YS/T91 GB/T3880 GJB1541 GJB2662 ASTM
Alloy: 5xxx, series; Temper: O, F, H111, H112, H12, H14, H16, H18, H19, H32, H34, H36, H38, H321
Thickness(mm): 0.2-150; Width(mm): 500-2400; Length(mm): 500-10000
Adopt standard: YS/T91 GB/T3880 GJB1541 GJB2662 ASTM
2) Heat treatment reinforced plate & sheet (pre-stretched plate):
Alloy: 2xxx, 6xxx, 7xxx series; Temper: O, F, H111, H112, T3, T4, T6, T7;
Thickness(mm): 0.5-200; Width(mm): 1000-2500; Length(mm): 2000-10000
Adopt standard: GB/T3880 GJB1541 GJB2662 ASTM
Alloy: 2xxx, 6xxx, 7xxx series; Temper: T351, T451, T651, T851
Thickness(mm): 0.5-200; Width(mm): 1000-2500; Length(mm): 2000-10000
Adopt standard: GJB1741 Q/SWA10204
3) Brazed sheet:
Alloy: LQ1, LQ2, LQ3; Temper: O, H32;
Thickness(mm): 0.5-2.0; Width(mm): 1000-1800; Length(mm): 2000-10000
Adopt standard: YS/T69
4) Tread plate:
Alloy: 1xxx, 3xxx, 5xxx series; Temper: O, H22, H24, H26;
Thickness(mm): Bottom thick 1.0~4.0; Width(mm): 1000-1600; Length(mm): 2000-10000
Adopt standard: GB/T3618 Q/EL432
5) Curtain sheet:
Alloy: 1xxx, 3xxxx series & 5005, 5052; Temper: O, H14, H24;
Thickness(mm): 1.5-4.0; Width(mm): 914-2200; Length(mm): 1500-5500
Adopt standard: YS/T429.1 EL/X282
6) Hot rolled coil: Alloy1*, 3*, 5*, 8* series; Temper O, F, H112; Thickness(mm) 2.5~7.0; Width(mm) 900~1700; Adopted standard GB/T16501
7) Stock for micron foil: Alloy 1235; Temper H14 Thickness(mm) 0.25~0.50; Width(mm) 900~1500 Adopt standard EL/X79 & EL/X24
8) Coating sheet: Alloy1*, 3* and 5* series; Temper H14, 16, 18, 22, 24, 26; Thickness(mm) 0.18~0.75; Width(mm) 1200~1550; Adopt standard: EL/X260
9) Curtain coil: Alloy1100, 3003, Temper H12, 22, 24, 26; Alloy5005, 5052; TemperH22, 24, 32, 34Thickness(mm)1.5~3.0; Width(mm)1000-1500; Adopt standard SWA/X2402
10) Lithographic coil: Alloy 1050; Temper H18; Thickness(mm)0.23-0.28; Width(mm)650-1500; Adopt standard SWA/X2402
11) Can stock: Alloy3104; Temper H19; Thickness(mm)0.28-0.31; Width(mm)1000-1550; Adopt standard YS/T435
12) Ceiling stock: Alloy 1*, 3*series; Temper H14, 16, 24, 26; Alloy 5005, 5052 Temper H22, 24 Thickness(mm) 0.4-1.0; Width(mm)200-1450; Adopt standard X/SWA21211
13) Bottle lids stock: Alloy8011; Temper H16, 18; Thickness(mm)0.20-0.30; Width(mm)500-1550; Adopt standard YS/T91& EL/X273
14) Coil for Al-composite pipe: Alloy1*, 3*, 8* series; Temper O, H22; Thickness(mm) 0.2-1.5; Width(mm)30-1550; Adopt standard YS/T434
15) Other coils: Alloy 1*, 3*, 8* series and 5005, 5052; Temper O, H1X, H2X; Thickness(mm) 0.2-6.0; Width(mm)60-2400; Adopt standard GB/T8544
Alloy 5* series, Temper O, H1X, H2X, H3X; Thickness(mm): 0.3-4.0; Width(mm): 900-2000 Adopt standard EL/X246
Alloy 2* 6* series, Temper O, H18; Thickness(mm): 0.5-4.0 Width(mm): 900-1800 Adopt standard EL/X246
Civil/Military application of Aluminium Pipe/Tube/Bar
1. Medium and small size extrusion products:
1) Rod and bar
Alloy: 2xxx, 4xxx, 6xxx, 7xxx series; Temper: H112, O, F, T4, T6
Alloy: 1xxx, 3xxx, 5xxx, 7xxx series; Temper: H112, O, F
Diameter (mm): 6-120
Adopt standard: GB/T3191 GJB2054
2) Tube and Pipe (Thin-wall)
Alloy: 1xxx, 3xxx, 5xxx series; Temper: O, H14, H34, H32
Alloy: 2xxx, 6xxx, 7xxx series; Temper: O, T4, T6
Wall Thickness (mm): 0.5-5; Width(mm): 6-130
Adopt standard: GB/T6893
3) Tube and Pipe (Thick-wall)
Alloy: 1xxx, 3xxx, 5xxx 8xxx series; Temper: H112, O, F
Alloy: 2xxx, 6xxx, 7xxx series; Temper: H112, F, O, T4, T6
Wall Thickness (mm): 5-40; Width(mm): 20-180
Adopt standard: GB4437 GB/T4437.1 GJB2381
2. Large size extrusion product
1) Tube and Pipe Products:
Alloy: 1xxx series, 5A02, 5A03, 5A05, 5A06, 3A21, 2A11, 2A12, 6A02, 7A04, 7A09
Temper: H112
Wall Thickness (mm): 10-40; Width(mm): 120-400
Alloy: 2A11, 2A12, 6A02, 5A06; Temper: O
Alloy: 2A11, 2A12, 6A02; Temper: T4
Alloy: 6A02, 7A04, 7A09; Temper: T6
Wall Thickness (mm): 10-35; Width(mm): 120-280
Adopt Standard: GB4437
2) Rod and Bar Products:
Alloy: From 1xxx to 7xxx series; Temper: H112, F
Alloy: 1xxx, 3xxx, 5xxx, 8xxx series Temper: O
Alloy: 2A11, 2A12, 2A13, 6061 Temper: T4
Alloy: 2xxx, 4xxx, 6xxx, 7xxx series Temper: T6
Diameter (mm): 50-150
Adopt standard: GB/T3191
List of marine or shipping building sheet; That is Alloy 5083 with Temper H111, H112, H116 and H321, the following is our technical standard.
5083H321 or H116
Application: Navigation Standard: Q/EL202-1999
1, Chemical composition: (%)
Si: 0. 4; Fe: 0. 4; Cu: 0. 1; Mn: 0. 4-1. 0 Mg: 4. 0-4. 9;
Cr: 0. 05-0. 25; Zn: 0. 25; Ti: 0. 15; Other: Each 0. 05, total 0. 15
2, Physical capabilities:
Tensile strength (σb): 305~385MPa 220-290Mpa(H112 or H111)
Yield strength (σ0. 2 ): 215~295MPa 205-275Mpa (H112 or H111)
Elongation (δ): ≥12%
3, Quality control:
Cracking and lamination is not allowed on the surface.
Ultrasonic flawing detecting is available with extra charge.
Other Forging Item
1. Hand forging
1) Alloy 5*** series, Temper O, F
2) Alloy 2***, 6*** and 7*** series, Temper T6, T4, T7452,T7352, O, F
2, Die Forging
1) Alloy 5***,series, Temper O, F
2) Alloy 2***, 6***,and 7***series, Temper T6,T4, T74(52), O, F
Adopt standard: ASTM B247
Ultrasonic Inspection: Level A or Level B available, Standard: MIL-STD 2154
Now this is a part of our aluminium foil exporting catalogue as following:
Civil application of Aluminium Foil
1. Appliance foil: Alloy 8011, 8111; Temper O; Thickness(mm) 0.01~0.02; Width(mm) 200~700; Inner Diameter(mm): 76.2, 152.4; Max O. D(mm) 450; Adopt Standard: GB3198
2. Cable foil; Alloy 1050, 1145; Temper O; Thickness(mm)0.1~0.2; Width(mm) 200~600
Inner Diameter(mm): 76.2; Max O. D(mm)800; Adopt Standard: GB3198
3. Pharmacy foil; Alloy1235, 8011, 8111; Temper H18, H19; Thickness(mm) 0.018~0.022
Width(mm) 400~600; Inner Diameter(mm): 76.2; Max O. D(mm)600
Adopt Standard: GB3198
4. Air-conditioner foil; Alloy1100, 8011, 3102; TemperH22, H24, H26, H19
Thickness(mm)0.07~0.20; Width(mm) 400~1310; Inner Diameter(mm): 150, 200, 505
Max O. D(mm)1450; Adopt Standard: YS/T95.1
5. Cigarette foil; Alloy1235; Temper O; Thickness(mm)0.006~0.007; Width(mm) 460~1320
Inner Diameter(mm): 76.2; Max O. D(mm)400; Adopt Standard: GB3198
6. Further fabricating foil; Alloy8011; Temper O, H22, H24, H26, H18
Thickness(mm)0.012~0.06; Width(mm) 300~1300; Inner Diameter(mm): 76.2
Max O. D(mm)1300; Adopt Standard: GB3198
7. Electronic foil; Alloy 1A99, 1A97, 3003, 3001; Temper H19
Thickness(mm) 0.09~0.15; 0.02~0.05; Width(mm) 500~1000
Inner Diameter(mm): 76.2; Max O. D(mm) 1450; Adopt Standard: GB/T3615
8. Lithographic sheet: Alloy 1050; Temper H18; Thickness(mm) 0.14~0.15
Width(mm) 600~1470; Inner Diameter(mm): 150, 200; Max O. D(mm) 1200
Adopt Standard: HG/T2619
9. Decoration foil: Alloy 1100, 3003; Temper H18; Thickness(mm) 0.026~0.15
Width(mm) 1240~1400; Inner Diameter(mm): 150, 200
Max O. D(mm) 1200; Adopt Standard: GB3198
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page